The USB-485-ISO has a built in, isolated voltage booster that provides power for Light-O-Rama accessories such as the Easy Light Linker wireless unit. This can be important when you have multiple networks and each network is large. The USB485-ISO completely isolates the PC’s USB connection from the RS-485 network. The USB485-ISO is designed to work at 500K speeds and more. Only one USB485-ISO is required to operate a network of LOR controllers (see item 3 in the diagram below.) 1 1/8” high x 2 5/8” wide x 2 5/8” deep. The USB485-ISO converts the short range USB output of the computer into the industry standard, long range RS-485 protocol used by the Light-O-Rama data network. USB485-ISO Isolated Adapter Isolated USB485 Adapter The USB485B provides power for your accessories. If you connect an accessory directly to some computer adapters (like our USB485), no power is passed through. Our Easy Light Linker modules and some of our other accessories require power typically supplied from the nearest light controller.
#Light o rama license crack Pc#
If you are going to connect a wireless unit directly to a PC or if you plan on future interactive displays you should choose the USB485B.
The USB485B has a built in voltage booster that provides power for LOR accessories such as the Easy Light Linker wireless unit. This adapter is designed to work at data speeds up to 250K but depending on your setup, might work at even higher speeds.
#Light o rama license crack serial#
The USB485B Serial Connector with Booster converts the short range Universal Serial Bus (USB) output of your computer into the industry standard, long range RS-485 protocol used by the Light-(see item 3 in the diagram below.) Only one USB485B is required to operate a network of controllers. USB485B Serial Adapter with Booster (our second most popular) USB485 Adapter with Booster If you want to connect a computer to an adapter and then to an accessory like the Easy Light Linker that will communicate wirelessly with your network, we recommend using the USB485B or the USB485-ISO as described below. This adapter does not directly supply power to accessories such as our wireless Easy Light Linkers. If you have multiple smart pixel devices on the same LOR data network you should consider switching to higher communication speeds.Ī special note about the USB485-HS and using powered accessories: The USB485HS adapter is designed to connect to a typical Light-O-Rama data network of controllers. Why would I need a high speed adapter? Smart pixel devices (including Cosmic Color pixels, ribbons and bulbs) require a lot of data. The USB485-HS is designed to work at 500K speeds and more. Other LOR USB adapters are designed for speeds of 250K or less, however they appear to work well at 500K so if you have a working 500K network using one of the other USB adapters there is no need to change. The USB485-HS is the choice when you plan to use higher speeds (500K+) for your LOR data network. One USB485-HS adapter is required to operate a network of controllers (see item 3 in the diagram below.) It is used to communicate between the PC and LOR light controllers. The USB485-HS converts the short range USB output of the computer into the industry standard, long range RS485 protocol. USB485-HS High Speed Serial Adapter USB485-high speed for LOR SuperSpeed data networks 5/8” high x 1 3/8” wide x 2” deep.Ī special note about the USB485 and using powered accessories: The USB485 adapter is designed to connect to a typical Light-O-Rama data network of controllers. One USB485 adapter is required to operate a network of controllers (see item 3 in the diagram below.) Included is a filtered 6′ USB cable. This adapter is our most popular, works at data speeds up to 250K and is typically included in Light-O-Rama starter packages.
The USB485 Serial Adapter converts the short range Universal Serial Bus (USB) output of your computer into the industry standard, long range RS-485 protocol used by the Light-O-Rama data network. USB485 Serial Adapter (our most popular) USB485 Adapter
0 kommentar(er)
